Printers and Plotters

Printers

Multifunction printers are located on all building floors next to studio areas. They are either Canon or Xerox printer that can print in color and black and white on letter and tabloid size.

Physical locations and printer names are as follows:

Bixby Hall

First Floor: Printermaking Studios
Printer Name: SAMFOX-Bixby-01_1

Second Floor: West end near room 214
Printer Name: SAMFOX-Bixby-02_1

Givens Hall

First Floor: West end of building architecture studio
Printer Name: SAMFOX-Givens-1FL_StudioWest

Second Floor: West end of building architecture studio
Printer Name: SAMFOX-Givens-2FL_StudioWest

Third Floor: West end of building architecture studio
Printer Name: SAMFOX-Givens-2FL_StudioWest

Kemper (Whitaker Lab)

Ground Floor: In the Whitaker Lab Kemper Hall 040L
Printer Name: SAMFOX-KAM-40_WhitakerLab1

Steinberg Hall

Ground Floor: In room 006
Printer Name: SAMFOX-SAG-006_1

Second Floor: Center area of building design and architecture studios
Printer Name: SAMFOX-SAG-2_Studio1

Walker Hall

Ground Floor: In room 050 studio area
Printer Name: SAMFOX-Walker-LL_Foyer

Third Floor: West end of building near elevators
Printer Name: SAMFOX-Walker-02_1

Weil Hall

First Floor: Room 105 (MFA-IVC Studio)
Printer Name: SAMFOX-Weil-105_1

Second Floor: West side of building
Printer Name: SAMFOX-Weil-02_Hall

Third Floor: West side of building
Printer Name: SAMFOX-Weil-03_Hall

Plotters

Whitaker Learning Lab

The following is a list of printers located in the Whitaker Learning Lab. If you have questions about how to use them and/or how to set up your files, please talk with a lab monitor or refer to information posted next to the equipment.

BrightPlots (3) – Paper: 24 lb bond paper, 36 in. wide roll; Cost: $1.00 sf (Color), $0.50 sf (B&W)

  • BrightPlot1 (HP DesignJet Z6810)
  • BrightPlot2 (HP DesignJet Z9)
  • BrightPlot3 (Canon Pro-4100)

MattePlots (4) – Paper: 46 lb bond paper, 36 in. wide roll*; Cost:$1.50 sf (Color), $1.00 sf (B&W)

  • MattePlot1 (HP DesignJet Z6810)
  • MattePlot2 (Canon Pro-4100)
  • MattePlot3* (Canon Colorado 1630).  Paper roll is  36″ wide, but the maximum print width is 35″.  MattePlot3 does not auto-rotate jobs so users must manually adjust orientation to fit within this width.  A 36 x 20 image will not print, but 20 x 36 will.  The first dimension is the width and this cannot exceed 35″.
  • MattePlot4 (Canon ImagePROGRAF TZ-30000)

MylarPlot (1) – Paper: Mylar, 42 in. wide roll; Cost: $2.75 sf (Color); $2.25 sf (B&W)

  • MylarPlot1 (HP DesignJet Z6600)

Name: Whitaker01 and Whitaker02

Brand: Xerox (Smaller, standard printers are also located throughout buildings.)
Sizes: 8.5×11, 11×17
Paper: 20 lb basic
Cost: $0.25 per page (Color); $0.04 per page (B&W)

Steinberg Hall, Room 203

Only one plotter is available in Steinberg Hall, Room 203 – SAG_203_BrightPlot1. If you have questions about how to use it and/or how to set up your files, please talk with a lab monitor or refer to information posted next to the equipment.

BrightPlots (1) – Paper: 24 lb bond paper, 36 in. wide roll; Cost: $1.00 sf (Color), $0.50 sf (B&W)

  • SAG_203_BrightPlot1 (HP DesignJet Z6600)